|
|
PowerSWITCH CNSH-500 - Switch - 5 ports - EN, Fast EN - 10Base-T, 100Base-TX at Backoffice
PowerSWITCH CNSH-500 - Switch - 5 ports - EN, Fast EN - 10Base-T, 100Base-TX
CNSH-500
|
This product is no longer available.
|
The optimal application for this Switching Hub is as a "Bridge" joining together network segments operating at different speeds. The CNSH-500 is capable of providing a bridge for Fast Ethernet (100Mbps) devices to communicate with Ethernet (10Mbps) devices. This combination allows users to palce Fast Ethernet segments and Ethernet segments on a single network. To double the available bandwidth, each port supports an Auto-Negotiation function that automatically places the network speed at its maximum level. When linked to other 100Mbps devices, each port can be set to forced 100Mbps Full Duplex mode via its DIP switch. Setting a port to forced 100Mbps Full-Duplex mode creates an independent segment that transmit data at collision-free 200Mbps! The CNSH-500 divides each port's traffic onto its own individual segment. This cuts a network's traffic load and reduces collisions on each segment. Network traffic can be further reduced by placing users (ex. Departments) and devices that normally talk to each other onto the same segment. The CNSH-500 also provides a Crossover function for Uplinking to a standard port on another Hub. Every port is capable of operating in an Auto-Negotiation mode, or can be set to a froced 100Mbps Full-Duplex mode by flipping the port's DIP switch. In every mode, this model provides capable of wire-speed "Forwarding and Filtering" rates that eliminate bad packets with minimal delay. This is a Plug and Play device. No software configuration is required. Users simply attach the proper cables, then turn the Hub "On". Each port automatically creates a separate collision domain that delivers data transmissions to connected devices at speeds ranging from 10Mbps to 200Mbps.| Product Description | PowerSWITCH CNSH-500 - switch - 5 ports | | Device Type | Switch | | Form Factor | External | | Dimensions (WxDxH) | 25 cm x 15 cm x 4.3 cm | | RAM | 1 MB | | Ports Qty | 5 x Ethernet 10Base-T, Ethernet 100Base-TX | | Data Transfer Rate | 100 Mbps | | Data Link Protocol | Ethernet, Fast Ethernet | | Communication Mode | Half-duplex, full-duplex | | Features | Uplink | | Compliant Standards | IEEE 802.3, IEEE 802.3u | | Power | AC 110/220 V ± 10% ( 50/60 Hz ) |
GENERAL |
| Device Type | Switch |
| Enclosure Type | External |
| Width | 25 cm |
| Depth | 15 cm |
| Height | 4.3 cm |
| Enclosure Colour | White |
MEMORY |
| RAM | 1 MB |
NETWORKING |
| Ports Qty | 5 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Data Transfer Rate | 100 Mbps |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Connectivity Technology | Wired |
| Communication Mode | Half-duplex, full-duplex |
| Switching Protocol | Ethernet |
| Status Indicators | Port status, link activity, collision status, power, transmit, receive |
| Features | Uplink |
| Compliant Standards | IEEE 802.3, IEEE 802.3u |
EXPANSION / CONNECTIVITY |
| Interfaces | 5 x network node - Ethernet 10Base-T/100Base-TX - RJ-45 female - 5
1 x network host - Ethernet 10Base-T/100Base-TX - RJ-45 female - 1 |
POWER |
| Power Device | Power supply - internal |
| Voltage Required | AC 110/220 V ± 10% ( 50/60 Hz ) |
| Power Consumption Operational | 8.5 Watt |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 45 °C |
| Humidity Range Operating | 10 - 90% |
|
|
|
