|
D-Link DES 3226S - Switch - 24 ports - EN, Fast EN - 10Base-T, 100Base-TX - 1U - stackable at Backoffice
D-Link DES 3226S - Switch - 24 ports - EN, Fast EN - 10Base-T, 100Base-TX - 1U - stackable DES-3226S
|
This product is no longer available.
|
The DES-3226S is a Stackable 10/100Mbps Layer 2 Switch designed for departmental connection. It provides 24 10/100Mbps ports, 1 GBIC port for server or fiber backbone connection, and scalable expansion through switch stacking of up to 6 units. Advanced features such as port trunking, VLANs and priority queues are also provided, allowing a department to effectively deploy a bottleneck-free switching network for easy integration with a larger enterprise or campus network.The switch provides 24 10/100Mbps ports supporting auto-sensing and auto-negotiation of network speeds and full/half duplex. These ports can connect to workstations and print servers, giving each a dedicated bandwidth. All ports support auto MDI-II/MDI-X uplink, allowing you to connect to workstations, servers, or other switches from any port without the need to change your usual straight-through twisted-pair cables. The switch provides an open slot for installation of a DES-332GS stack module, which is equipped with a stacking port and a GBIC port. The stacking port is for switch stacking. The GBIC port provides for flexible deployment of multi-mode or extended cable-length single-mode fiber. At 2000Mbps full duplex, this port gives you Gigabit server connection or attachment to a fiber backbone.Product Description | D-Link DES 3226S - switch - 24 ports | Device Type | Switch - stackable | Form Factor | External - 1U | Dimensions (WxDxH) | 44.1 cm x 21 cm x 4.3 cm | Weight | 2.5 kg | RAM | 8 MB | Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX | Data Transfer Rate | 100 Mbps | Data Link Protocol | Ethernet, Fast Ethernet | Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet | Communication Mode | Half-duplex, full-duplex | Features | Flow control, Layer 2 switching, auto-sensing per device, DHCP support, auto-correction of twisted-pair polarity reverse, auto-negotiation, BOOTP support, trunking, VLAN support, IGMP snooping, stackable | Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x | Power | AC 100/240 V ( 50/60 Hz ) |
GENERAL |
Device Type | Switch - stackable |
Enclosure Type | External - 1U |
Installed Modules Qty (Max) | 0 (installed) / 1 (max) |
Width | 44.1 cm |
Depth | 21 cm |
Height | 4.3 cm |
Weight | 2.5 kg |
MEMORY |
RAM | 8 MB |
NETWORKING |
Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX |
Data Transfer Rate | 100 Mbps |
Data Link Protocol | Ethernet, Fast Ethernet |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet |
Connectivity Technology | Wired |
Communication Mode | Half-duplex, full-duplex |
Switching Protocol | Ethernet |
MAC Address Table Size | 8K entries |
Status Indicators | Link activity, port transmission speed, power |
Features | Flow control, Layer 2 switching, auto-sensing per device, DHCP support, auto-correction of twisted-pair polarity reverse, auto-negotiation, BOOTP support, trunking, VLAN support, IGMP snooping, stackable |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x |
EXPANSION / CONNECTIVITY |
Expansion Slots Total (Free) | 1 ( 1 ) x Expansion Slot |
Interfaces | 24 x network node - Ethernet 10Base-T/100Base-TX - RJ-45 1 x management - RS-232 - 9 pin D-Sub (DB-9) |
MISCELLANEOUS |
Compliant Standards | CE, FCC Class A certified, CSA, VCCI, C-Tick, BSMI |
POWER |
Power Device | Power supply - internal |
Voltage Required | AC 100/240 V ( 50/60 Hz ) |
Power Consumption Operational | 29 Watt |
ENVIRONMENTAL PARAMETERS |
Min Operating Temperature | 0 °C |
Max Operating Temperature | 50 °C |
Humidity Range Operating | 5 - 95% |
|
|
|