|
|
IBM FAStT EXP100 Expansion Unit - Storage enclosure - 14 bays ( SATA-150 ) - 0 x HD - rack-mountable - 3U at Backoffice
IBM FAStT EXP100 Expansion Unit - Storage enclosure - 14 bays ( SATA-150 ) - 0 x HD - rack-mountable - 3U
28P8811
|
This product is no longer available.
|
Intended for data archival, data reference and near-line storage applications, IBM FAStT EXP100 Storage Expansion Unit supports the attachment of Serial Advanced Technology Attachment (SATA) disk drives for the TotalStorage FAStT900 and FAStT600 Storage Servers. This rack-mountable enclosure supports up to 14 of the new FAStT 250 GB SATA disk drive modules, offering up to 3.5 TB of storage capacity per enclosure. Coupled with the FAStT900 Storage Server, you can configure RAID protected storage solutions of up to 56 TB, or up to 28 TB with the FAStT600. The expansion unit is designed to provide economical, scalable storage for your rapidly growing application needs for low-access, data reference capacity. The EXP100 utilizes SATA technology and is designed with redundant 2 Gbps Fiber Channel connections to the FAStT Storage Server for increased reliability and performance as compared to older, non-redundant parallel Advanced Technology Attachment (ATA) products. FAStT Storage Servers with the EXP100 build upon the highly successful and widely established base of FAStT Storage Servers. You can add them to your storage area networks to help address the needs of various fixed content, data reference applications that require large amounts of storage capacity but do not have the high utilization and access characteristics of Fiber Channel disk drive storage.| Product Description | IBM FAStT EXP100 Expansion Unit - storage enclosure | | Device Type | Storage enclosure | | Enclosure Type | Rack-mountable - 3U | | Installed Devices / Modules Qty | 0 (installed) / 14 (max) | | Supported Drives | Serial ATA-150 | | Dimensions (WxDxH) | 48.2 cm x 59.7 cm x 13.2 cm | | Weight | 25.9 kg | | Storage Controller | Fibre Channel ( Serial ATA-150 ) | | Hard Drive | 0 hot-swap Serial ATA-150 | | Power | AC 120/230 V ( 50/60 Hz ) | | Power Redundancy | Built-in | | Manufacturer Warranty | 3 years warranty |
GENERAL |
| Device Type | Storage enclosure |
| Enclosure Type | Rack-mountable - 3U |
| Width | 48.2 cm |
| Depth | 59.7 cm |
| Height | 13.2 cm |
| Weight | 25.9 kg |
CABINET (CHASSIS) |
| Installed Devices / Modules Qty | 0 |
| Supported Devices / Modules Qty | 14 |
| Supported Drives | Serial ATA-150 |
STORAGE CONTROLLER |
| Type | Fibre Channel ( 2Gb Fibre Channel ) |
| Controller Interface Type | Serial ATA-150 |
STORAGE HARD DRIVE |
| Type | Hot-swap - plug-in module |
| Capacity | 0 |
| Interface Type | Serial ATA-150 |
EXPANSION / CONNECTIVITY |
| Expansion Bays Total (Free) | 14 ( 14 ) x hot-swap |
| Expansion Slots Total (Free) | 4 SFP (mini-GBIC) |
POWER |
| Power Device | 2 x power supply - hot-plug - plug-in module |
| Max Supported Qty | 2 |
| Power Redundancy | Built-in |
| Power Redundancy Scheme | 1+1 |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Power Consumption Operational | 390 Watt |
MANUFACTURER WARRANTY |
| Service & Support | 3 years warranty |
| Service & Support Details | Limited warranty - 3 years |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 10 °C |
| Max Operating Temperature | 35 °C |
| Humidity Range Operating | 8 - 80% |
| Sound Emission | 60 dB |
|
|
|
