|
Thecus N5200 Pro - NAS - 0 GB - Serial ATA-300 - RAID 0, 1, 5, 6, 10, JBOD - Gigabit Ethernet - iSCSI at Backoffice
Thecus N5200 Pro - NAS - 0 GB - Serial ATA-300 - RAID 0, 1, 5, 6, 10, JBOD - Gigabit Ethernet - iSCSI OS-NAS5200-P
|
This product is no longer available.
|
N5200PRO is not only a file server, but it also supports iSCSI initiators. Your server can access N5200PRO as a direct-attached-storage over the LAN or Internet. There is no easier way to expand the capacity of your current application servers. All storage needs can be centrally managed and deployed. This brings ultimate flexibility to users. N5200PRO supports multiple RAID volumes on one system. So, you can create RAID 0 for your non-critical data, and create RAID 5 for your mission-critical data. Create the RAID level protection depending on your needs.N5200PRO is equipped with an ultra low voltage Intel 1.5 GHz Celeron M processor and 512 MB DDR system memory, which provides even faster response and more concurrent connections. With its built-in Module compatibility, the N5200PRO is able to run more applications at the same time. N5200PRO supports scheduled power on / off. With this feature, users can set what time the system turns on or off. This feature is a big plus for people who want to conserve energy. Wake-on-LAN enables users to remotely turn the system on without leaving their seat.Because businesses depend on being able to retrieve their data, the N5200B PRO comes with both load balancing and failover to optimize and ensure network traffic. With its failover capability, the N5200PRO automatically switches to an alternate Ethernet connection should the first one be inaccessible. With these two functions, the N5200B PRO provides users with greater network reliability. The N5200 is also equipped with Nsync, Thecus' remote data backup application. With Nsync, users can have the N5200PRO automatically upload files to an external storage device at a designated time. Designed for SMBs for enhanced data protection, Nsync takes the guesswork out of data backup.Product Description | Thecus N5200 Pro - NAS server | Device Type | NAS server | Host Connectivity | Gigabit Ethernet | Total Storage Capacity | 0 GB | Installed Devices / Modules Qty | 0 (installed) / 5 (max) | Dimensions (WxDxH) | 19 cm x 23 cm x 23 cm | Processor | 1 x Intel Celeron M 1.5 GHz | Storage Controller | 1 x RAID - Serial ATA-300 - RAID 0, 1, 5, 6, 10, JBOD | Hard Drive | Hot-swap Serial ATA-300 | Networking | Network adapter - Ethernet, Fast Ethernet, Gigabit Ethernet | Power | AC 120/230 V ( 50/60 Hz ) |
GENERAL |
Device Type | NAS server |
Host Connectivity | Gigabit Ethernet |
Total Storage Capacity | 0 GB |
Installed Devices / Modules Qty | 0 (installed) / 5 (max) |
Width | 19 cm |
Depth | 23 cm |
Height | 23 cm |
Built-in Devices | Led panel |
PROCESSOR / MEMORY |
Processors Installed | 1 x Intel Celeron M 1.5 GHz |
RAM Installed | DRAM 512 MB |
STORAGE CONTROLLER |
Type | 1 x RAID - integrated |
Controller Interface Type | Serial ATA-300 |
Supported Devices | Hard drive, disk array (RAID) |
Max Storage Devices Qty | 5 |
RAID Level | RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD |
HARD DRIVE |
Type | Hot-swap - 3.5" x 1/3H |
Interface Type | Serial ATA-300 |
NETWORKING |
Type | Network adapter |
Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
Network / Transport Protocol | iSCSI |
Remote Management Protocol | HTTP, HTTPS |
Network Services Compatibility | Microsoft Active Directory (AD), Microsoft CIFS, Network File System (NFS), FTP, Server Message Block (SMB), Apple File Protocol (AFP), HTTP, HTTPS |
Features | Dynamic IP address assignment , DHCP support, wake on LAN (WOL), print server, static IP mode |
Compliant Standards | IEEE 802.3ad (LACP) |
EXPANSION / CONNECTIVITY |
Expansion Bays Total (Free) | 5 ( 5 ) x hot-swap - 3.5" x 1/3H |
Interfaces | 1 x eSATA - 7 pin external Serial ATA 3 x Hi-Speed USB - 4 PIN USB Type A 1 x Hi-Speed USB - 4 PIN USB Type B 2 x Ethernet 1000 - RJ-45 |
MISCELLANEOUS |
Cables Included | 1 x network cable |
Compliant Standards | CE, C-Tick, BSMI, FCC, RoHS |
POWER |
Power Device | Power supply - internal |
Voltage Required | AC 120/230 V ( 50/60 Hz ) |
ENVIRONMENTAL PARAMETERS |
Min Operating Temperature | 0 °C |
Max Operating Temperature | 40 °C |
Humidity Range Operating | 20 - 85% |
|
|
|