|
|
QLogic SANbox 5200 - Switch - Fibre Channel + 16 x SFP / 4 x XPAK (empty) - 1U at Backoffice
QLogic SANbox 5200 - Switch - Fibre Channel + 16 x SFP / 4 x XPAK (empty) - 1U
SB5200-20A
|
This product is no longer available.
|
QLogic SANbox 5200 2Gb, the first Fibre Channel stackable switches to be configured and zoned with simple wizards. Plus, SANsurfer Management Suite makes stack management easy throughout your SAN lifecycle by helping you install, configure, monitor, diagnose and upgrade your QLogic HBAs and switches - all from ONE application! Starting at 8 ports, SANbox 5200/5202 stackable switches offer an entry point affordable to the smallest business. And with an easy-to-use graphical user interface (GUI), you won't have to hire a SAN expert to manage your stack. QLogic software is always shipped free with every switch sold. Start with 8 ports and then grow your SAN in 4 port increments up to 64 ports in a single stack. A key benefit is the ability to add, change or delete switches without disrupting your storage network. A single, 10Gb inter-switch link (ISL) ensures low latency between switches and eliminates the cost and complexity of trunking up to six 2Gb ports. IMPORTANT: Small Form Factor Pluggable (SFPs) are required and sold separately. Quantity needed depends on the number of ports populated; Cables - Required and sold separately. Quantity needed depends on the number of ports populated; Service Plans are optional and highly recommended. Select from QLogic PRIME, SELECT and EXCHANGE Service Plans.| Product Description | QLogic SANbox 5200 - switch | | Device Type | Switch | | Form Factor | External - 1U | | Dimensions (WxDxH) | 43.2 cm x 30.5 cm x 4.3 cm | | Weight | 4.1 kg | | Data Link Protocol | Fibre Channel | | Empty Slots | 16 x SFP (mini-GBIC) / 4 x XPAK | | Remote Management Protocol | SNMP, Telnet | | Communication Mode | Full-duplex | | Features | Full duplex capability, auto-negotiation | | Power | AC 120/230 V | | Manufacturer Warranty | 2 years warranty |
GENERAL |
| Device Type | Switch |
| Enclosure Type | External - 1U |
| Width | 43.2 cm |
| Depth | 30.5 cm |
| Height | 4.3 cm |
| Weight | 4.1 kg |
NETWORKING |
| Data Link Protocol | Fibre Channel |
| Fibre Channel | FC-AL, FC-AL-2, FC-FG, FC-FLA, FC-GS, FC-GS-2, FC-GS-3, FC-PH, FC-PH-2, FC-PH-3, FC-SW-2, FC-Tape, FC-VI |
| Remote Management Protocol | SNMP, Telnet |
| Connectivity Technology | Wired |
| Communication Mode | Full-duplex |
| Features | Full duplex capability, auto-negotiation |
EXPANSION / CONNECTIVITY |
| Expansion Slots Total (Free) | 16 ( 16 ) x SFP (mini-GBIC)
4 ( 4 ) x XPAK |
| Interfaces | 1 x management - Ethernet 10Base-T/100Base-TX - RJ-45
1 x management |
MISCELLANEOUS |
| Rack Mounting Kit | Optional |
| Compliant Standards | CE, FCC Class A certified, UL, TUV, cUL, EN 60950, EN 61000-3-2, ICES-003, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, CSA 22.2 No. 950, EN55022 Class A, UL 60950 |
POWER |
| Power Device | Power supply - internal |
| Voltage Required | AC 120/230 V |
| Power Consumption Operational | 100 Watt |
SOFTWARE / SYSTEM REQUIREMENTS |
| Software Included | SANsurfer Management Suite |
MANUFACTURER WARRANTY |
| Service & Support | 2 years warranty |
| Service & Support Details | Limited warranty - 2 years |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 5 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 15 - 80% |
| Shock Tolerance | 4 g @ 1ms (operating) |
| Max Altitude Operating | 3 km |
|
|
|
