|
TP-Link TD-8841 - Router + 4-port switch - DSL - EN, USB, Fast EN at Backoffice
TP-Link TD-8841 - Router + 4-port switch - DSL - EN, USB, Fast EN TD-8841
|
This product is no longer available.
|
TD-8841 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU. The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications; MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I.432 ATM Physical Layer. TD-8841 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices, supporting Auto MDI/MDIX.The TD-8841 uses ADSL (Asymmetric Digital Subscriber Line) technology for Internet connection speeds of up to 455x faster than dial-up, while using a standard phone line. With a built-in 4-port switch, up to four network-ready computers or devices can simultaneously be connected to the TD-8841 for access to the Internet.TD-8841 not only use html (web mode through Ethernet port) to configure the MODEM but also use external utility software, too. With TP-LINK’s excellent design of circuit and high quality production, TP-Link guarantees ADSL MODEM a high performance, very good stability and easy to use.Product Description | TP-Link TD-8841 - router | Device Type | Router + 4-port switch (integrated) | Form Factor | External | Routing Protocol | RIP-1, RIP-2, static IP routing | Data Link Protocol | Ethernet, USB, Fast Ethernet | Network / Transport Protocol | TCP/IP, UDP/IP, AAL2, AAL5, ARP, DHCP, DNS | Remote Management Protocol | Telnet, HTTP | Digital Signaling Protocol | ADSL, ADSL2+ | Included Accessories | ADSL splitter | Features | NAT support, NAPT support, auto-uplink (auto MDI/MDI-X), IGMP snooping, dynamic DNS server, MAC address filtering, VPN passthrough, parental control, IP address filtering, firmware upgradable, Quality of Service (QoS), virtual server support, DHCP server, DNS proxy | Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1p |
GENERAL |
Device Type | Router |
Form Factor | External |
NETWORKING |
Connectivity Technology | Wired |
Integrated Switch | 4-port switch |
Framing Format | ANSI T1.413 |
Data Link Protocol | Ethernet, USB, Fast Ethernet |
Switching Protocol | ATM, Ethernet |
Network / Transport Protocol | TCP/IP, UDP/IP, AAL2, AAL5, ARP, DHCP, DNS |
Routing Protocol | RIP-1, RIP-2, static IP routing |
Remote Management Protocol | Telnet, HTTP |
Status Indicators | Link activity, power |
Features | NAT support, NAPT support, auto-uplink (auto MDI/MDI-X), IGMP snooping, dynamic DNS server, MAC address filtering, VPN passthrough, parental control, IP address filtering, firmware upgradable, Quality of Service (QoS), virtual server support, DHCP server, DNS proxy |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1p |
COMMUNICATIONS |
Type | DSL modem |
Digital Signaling Protocol | ADSL, ADSL2+ |
Protocols & Specifications | ITU G.992.2 (G.Lite), ITU G.992.1 (G.DMT) Annex A, ITU G.992.1 (G.DMT) Annex B, ITU G.992.3 Annex M, ITU G.992.5 Annex A, ITU G.992.5 Annex L |
Max Transfer Rate | 24 Mbps |
EXPANSION / CONNECTIVITY |
Interfaces | 4 x network - Ethernet 10/100 - RJ-45 1 x modem - ADSL2+ - RJ-11 1 x USB - 4 PIN USB Type B |
MISCELLANEOUS |
Included Accessories | ADSL splitter |
Cables (Details) | 1 x network cable 1 x phone cable 1 x USB cable |
Authentication Method | PAP, CHAP, MS-CHAP |
Compliant Standards | EN 60950, EN55022, EN55024, UPnP, FCC Part 15 B |
POWER |
Power Device | Power adapter - external |
SOFTWARE / SYSTEM REQUIREMENTS |
Software Included | Drivers & Utilities |
ENVIRONMENTAL PARAMETERS |
Min Operating Temperature | 0 °C |
Max Operating Temperature | 40 °C |
Humidity Range Operating | 10 - 90% |
|
|
|