Information and Communication Technologies
Country
Prices in
VAT
Tandberg SuperLoader 5120L - Tape autoloader - 2.56 TB / 5.12 TB - slots: 16 - Super DLT ( 160 GB / 320 GB ) - SDLT 320 - SCSI LVD - rack-mountable - 2U - barcode reader at Backoffice

Tandberg SuperLoader 5120L - Tape autoloader - 2.56 TB / 5.12 TB - slots: 16 - Super DLT ( 160 GB / 320 GB ) - SDLT 320 - SCSI LVD - rack-mountable - 2U - barcode reader
8016676600


This product is no longer available.
The Tandberg SuperLoader provides automated scalable tape automation in a rack-mountable 2U form factor as well as the high capacity, performance and reliability of DLTtape technology. Data center space in network environments is at a premium resulting in new efficient architectures for servers and storage. The Tandberg SuperLoader is a significant advancement in rack optimized tape automation providing the highest removable data storage density available in a 2U high form factor. The SuperLoader system is based on a modular architecture that facilitates unmatched upgradeability, serviceability and configuration flexibility. The tape drive, power supply, cooling and interfaces are contained within a single module that can be replaced or upgraded in seconds. In addition, all 16-cartridge storage slots are contained in two removable, eight-cartridge modules. This allows users to start with an entry-level configuration and easily upgrade capacity and performance as their needs change. The Tandberg SuperLoader system is equipped with an Ethernet port that provides direct access to its integrated web-based management tools, without the need to install additional interfaces or software. Using a standard web browser, remote IT personnel can configure, control, monitor, diagnose, maintain and update the SuperLoader system. In addition, the SuperLoader system supports the industry standard SNMP management information base utilized by popular network management packages. Like all Tandberg DLTtape products, the Tandberg SuperLoader system is designed to provide investment protection by offering backward compatibility to millions of DLTtape media cartridges. The SuperLoader product provides backward read compatibility with millions of DLTtape IV media cartridges recorded on DLT1/VS80, DLT4000, DLT7000 and DLT8000 formats, while the DLT1 SuperLoader can read the DLT1/VS80 and DLT4000 format.

Product DescriptionTandberg SuperLoader 5120L - tape autoloader - Super DLT - SCSI
Device TypeTape autoloader - Super DLT
Recording StandardSuperDLT 320
Enclosure TypeRack-mountable - 2U
Interface TypeSCSI LVD
Total Storage Capacity2.56 TB (native) / 5.12 TB (compressed)
Removable Media Capacity16
Supported Tape DrivesSuperDLT
Key FeaturesBarcode reader
Dimensions (WxDxH)45 cm x 75.5 cm x 8.9 cm
Weight22.7 kg
Storage RemovableSuper DLT
Storage Removable Capacity160 GB (native) / 320 GB (compressed)
Supported Tape Cartridges (Read and Write)Super DLT
Data Transfer Rate (native)11 MBps ( 38.7 GBph )
Data Transfer Rate (compressed)22 MBps ( 77.3 GBph )
PowerAC 120/230 V ( 50/60 Hz )
Manufacturer Warranty3 years warranty

GENERAL

Device TypeTape autoloader - Super DLT
Recording StandardSuperDLT 320
Enclosure TypeRack-mountable - 2U
Interface TypeSCSI LVD
Total Storage Capacity2.56 TB (native) / 5.12 TB (compressed)
Removable Media Capacity16
Supported Tape DrivesSuperDLT
Key FeaturesBarcode reader
Built-in DevicesStatus LCD
Enclosure ColourBlack
Width45 cm
Depth75.5 cm
Height8.9 cm
Weight22.7 kg

STORAGE REMOVABLE

TypeSuper DLT
Capacity160 GB (native) / 320 GB (compressed)
Supported Tape Cartridges (Read and Write)Super DLT
Recording StandardSuperDLT
Data Transfer Rate (native)11 MBps ( 38.7 GBph )
Data Transfer Rate (compressed)22 MBps ( 77.3 GBph )
Average Seek / Access Time60 sec

EXPANSION / CONNECTIVITY

Interfaces1 x Ultra2 Wide SCSI ( input ) - 68 PIN VHDCI (Mini-Centronics)
1 x Ethernet 10Base-T/100Base-TX ( management ) - RJ-45
1 x Ultra2 Wide SCSI ( output ) - 68 PIN VHDCI (Mini-Centronics)

MISCELLANEOUS

Cables Included1 x SCSI cable
1 x SCSI terminator
Rack Mounting KitIncluded
MTBF1,000,000 hour(s)
Compliant StandardsFCC Class B certified, CE, C-Tick, VCCI Class B ITE, EN 60950, EN55022, ICES-003, IEC950, UL 1950, EN55024

POWER

TypePower supply
Voltage RequiredAC 120/230 V ( 50/60 Hz )

SOFTWARE / SYSTEM REQUIREMENTS

Software IncludedDrivers & Utilities

MANUFACTURER WARRANTY

Service & Support3 years warranty
Service & Support DetailsLimited warranty - 3 years

ENVIRONMENTAL PARAMETERS

Min Operating Temperature10 °C
Max Operating Temperature35 °C
Humidity Range Operating20 - 80%
Sound Emission50 dBA